12-Kanal-WiFi-Relaismodul eWek APP-Fernbedienung Selbstsperre DC 8 V-28 V AC 85 V-250 V Funkschalter für Smart Home

eWek 12-way wifi remote intelligent relay adapter switch 433 remote control inching self-locking The module supports 4 control methods: 1. ewek remote network control, as long as the device is one, wireless distance 2. Establish a scene mode in the APP and automatically control it. 3. Close range RF433 remote control, depending on the power of the transmitter, normal 0-50M 4. External physical switch control, manual control Module size: 99*87*20mm PCB boards are divided into: according to power supply: 1: DC-8-28V+Type-C 5V power supply 2: AC85-250V+Type-C 5V power supply The PCB layout of different power supply models is slightly different. eWek 12-way module manual: ● Use eWek for mobile apps (supporting Apple and Android phones): Search for eWek in the mobile software market or on the app, download, install, and register it; ●Add 1-4 channels: Press and hold the A1 button on the module until the light flashes 3 times (if powered on, it does not need to flash 3 times), and then operate the add device on the phone; ●Add 5-8 channels: When the module is powered ofnd restarted, press and hold the B1 button on the module (if there is no B1, press A5) until the lights flash 3 times (if powered on, there is no need to press the interval flash 3 times), and then operate the add device on the phone. ●Add 9-12 channels: When the module is powered ofnd restarted, press and hold the A9 button on the module until the light flashes 3 times (if powered on, it does not need to flash 3 times), and then operate the add device on the phone. ●If you cant find it on your phone all the time, please exit the app and try again. Repeat the operation several times (remember to power ofnd restart the module). Note: Due to the characteristics of the eWek Network module, the APP needs to add three eWek Network modules, each module controlg 4 relays to achieve control of 12 relays. APP function setting instructions: Support the mobile eWek APP function settings as follows: 1. Jog: Maximum time 59 minutes and 59 seconds Timing: Up to 23 hours and 59 minutes Delay: Up to 23 hours and 59 minutes Fully open, Fully closed, 2. Interlock, supporting all interlocks, that is, only one relay can be activated. 3. Power-on status, supporting power-on on, power-on off, and restoring the state before power-off. 4. Support for sharing devices 5. Supports offe reminders 6. Support for querying operation records 7. Support device name change and corresponding channel name change 8. Support scenario kage settings. 【 RF 433MHZ Remote Control Function Description 】 (supports 433mhz remote control) (If there is any flashing that does not comply with the step sequence during operation, please power ofnd restart to try again), Attention: To restart after power outage, wait for the indicator light to flash completely before operating; Action explanation: Self locking (press once to open, then press once to close) Action explanation: Jog (press once to open, automatically close after about 0.5 seconds) Action explanation: Press the lock (hold it down and do not release, release and close) Action explanation: Only on (this key can only be turned on and cannot be turned off) Action explanation: Only close (this key can only be closed and cannot be opened) (Learn self-locking) Quickly press the Settings button 5 times, and relay 1 will flash. (Click the Settings button to change the relay number to be learned) At this time, long press and hold one key on the remote control to learn one key. You can continue to press all keys. After the operation is completed, you need to power ofnd restart; (Learn to jog) Quickly press the Settings button 6 times, and relay 1 will flash. (Click the Settings button to change the relay number to be learned) At this time, long press and hold one key on the remote control to learn one key. You can continue to press all keys. After the operation is completed, you need to power ofnd restart; (Learn to press the lock) Quickly press the Settings button 7 times, and relay 1 will flash. (Click the Settings button to change the relay number to be learned) At this time, long press and hold one key on the remote control to learn one key. You can continue to press all keys. After the operation is completed, you need to power ofnd restart; (Learning only opens) Quickly press the Set button 8 times, and relay 1 and 2 will flash simultaneously. Press the Set button once to change to relay 1 flashing (continue to click the Set button to change the relay number to be learned). At this time, long press one key on the remote control to complete the learning; (Learn only to close) Quickly press the Set button 9 times, and relays 1, 2, and 3 will flash simultaneously. Press the Set button once to change to relay 1 flashing (continue to click the Set button to change the relay number to be learned). At this time, long press one key on the remote control to complete the learning; (Learn to fully open) Quickly press the Set button 8 times, and relays 1 and 2 will flash simultaneously. At this time, one key of the remote control will learn to fully open, complete; (Learn to fully close) Quickly press the Set button 9 times, and relays 1, 2, and 3 will flash simultaneously. At this time, one key of the remote control will learn to fully open, complete; (One button in the learning area controls relay 2.3.8 at the same time): Press the Set button 5 times, relay 1 flashes, press the Set button 1 times, relay 2 flashes, press the Set button 3 times, relay 2 and 3 flash simultaneously, press the Set button 8 times, relay 2.3.8 flashes at the same time. At this time, press and hold button 1 on the remote control until the relay light changes, release, power off, and restart, complete. Additional function: Set relay 3 to jog for 200 milliseconds (note: if the indicator light is incorrect midway, power ofnd restart immediately): (1) Quickly press the Settings button 11 times, observe that the indicator light next to the settings button keeps flashing 3 times, and relay 1 lights up, (2) Press the Set button once, and relay 2 will light up, (3) Press the Set button once, and relay 3 will light up, (4) Quickly press the Settings button twice and observe the indicator light next to the settings button flashing at a constant speed, (5) Press once to set relay 3 to remain on, (6) Press the Set button three times, and relay 3 will jog for 100 milliseconds (7) Press the Set button three times, and relay 3 will jog for 200 milliseconds, (8) Press and hold the Settings button for 2 seconds to save and exit, complete. Repeat (5), (6), and (7) to reset, with a minimum jog speed of 50 milliseconds (Reminder: You can continue the operation by pressing 3 times above. Each time you press 3 times, it increases by 100 milliseconds. If you press 2 times, it increases by 50 milliseconds. If you press 4 times, it increases by 1 second.) ● Factory reset: Press and hold for 10 seconds, observe that the indicator flashes 8 times, and all are deleted successfully. Support: Inching, self-locking, interlocking, timing, delay Reminder: Due to the continuous upgrading of the product, slight changes in the layout of the components are normal. If there are any mandatory requirements, please make notes and explain them. Please consult and communicate more before purchasing.