ISCOOTER IX3 10" Offroad-Elektroroller, 800-W-Motor, 48-V-10-Ah-Akku, App-Steuerung

High-Performance Electric Scooter iScooter iX3 electric scooter for adults is your ideal companion for commuting, grocery runs, off-road adventures, and short trips. With a robust 48V/10h battery, this scooter boasts an impressive 30-40km cruising range, making it a cost-effective choice for your daily travels. 800W Powerful Brushless Motor It ensures a smooth and comfortable ride, delivers high torque with low power consumption, reaching a top speed of 40km/h and conquering slopes of up to 20-25 degrees. Customize your riding experience through the "MiniRobot" app, where you can set the top speed and lock your e-scooter for adults securely. 10 Inch Off Road Pneumatic Tubeless Tires The 10-inch off-road pneumatic tubeless tires are designed to tackle various terrains, from city streets to dirt paths. Paired with front and rear dual shock absorbers, the iX3 guarantees an excellent riding experience, especially for suburban commuting. Height-adjustable Handlebar It also comes with a foldable design and adjustable handlebar height (44.5-52.8 inches). Weighing only 23kg and supporting a maximum load of 110kg, it's a breeze to carry on public transportation or stow in your car. Foldable design and front and rear LED lights This adult electric scooter boasts a unique combination of features, including directional signals, ambient lighting, and enhanced front headlights and tail lights. Say goodbye to worries about nighttime rides. Specification: Brand: iScooter Type: Electric Scooter Model: iX3 Max speed: 40 km/h Max range: 40 km Climbing angle: 25° Shock absorption: Dual front and rear suspension Water resistance: IPX4 Battery capacity: 48V 10Ah 480Wh Charging time: 6-7 H Smart battery management System: Yes Maximum power: 800W Wheel drive: Rear wheel Front brake: Mechanical disc brake electric brake Rear brake: Mechanical disc brake electric brake Lights: Front LED Rear LED lights Brake lights: Yes (Flashing) Turn lights: Yes Ambient lights: Yes Tires type: Off-Road Pneumatic Tire Tires size: 10 inches App control: Yes Bluetooth: Yes Minimum age: 16 years Max. rider weight: 110kg Folding mechanism: Easy 3 steps folding (require hand) Info display: LED Display Information on LED Screen: Current Speed, Battery level, Cruise control, Headlight, which mode is activated, maintenance, Temperature, turn signal indicator headlight on/off, Trip distance, etc Riding modes: 3 Riding modes (Eco-10km/h, Drive-18km/h and Sport modes-25km/h) Cruise control: Yes Bell: Yes, electronic horn NFC technology (for unlock): No Certified reflectors: Yes (front, rear and side E-MARK reflectors) Product Weight: 23.25kg Package Weight: 27kg Product Size: 120 x 65 x 128cm Package Size: 120 x 24.5 x 52cm Package Contents 1 x iX3 Electric scooter 1 x Charger 1 x Tool Kit 1 x Allen Wrench 1 x User Manual EU Countries Can be delivered within 4-7 Days.You don't have to pay delivery fee. If you encounter any problems when you receive the product, please contact our professional after-sales customer service first. Email: lijuping@gunai.store Whatsapp: +86 17841010701 Common bicycle problems and solutions Q: Error code appears on the meter A: Check the manual to see what kind of fault the error code belongs to, follow the instructions to handle it, and if it still doesn't work, provide error code pictures/videos. Q: Charger doesn't work A: First check whether the charger is green or red to green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red to green light indicates that the charger is normal, it may be a meter problem. Q: The meter can't be turned on A: Check whether the meter line/controller line is plugged in tightly, and re-plug it; if it doesn't work, it may be a problem with the meter/main line/controller Q: Pedal assist doesn't work A: Check whether the meter parameters are correct, confirm whether the throttle can work, and whether the sensor line is damaged or loose; if all are correct, replace the sensor Q: Rear wheel shakes A: Check whether the spokes are loose and whether they are installed in place; you can tighten the spokes and reinstall the rear wheel. Q: Motor does not work/has strong noise A: Check if the controller is loose, re-plug the motor cable of the rear wheel; provide a video of the noise for the technician to determine what the sound is. Q: Battery does not work/battery life is insufficient A: Measure the battery voltage after fully charging the battery (provide pictures). If the voltage is abnormal, there may be a problem with the battery/battery cover/circuit board. For battery life issues, customers test the battery life under full charge and provide the VOL when fully charged, the ODO (total mileage) when fully charged, the VOL when the battery is exhausted, and the ODO (total mileage) when the battery is exhausted. Q: Pedals cannot be installed A: Check if the left and right pedals are installed/twisted in reverse order. If so, check if the crank/pedal threads are slipped. If slipped, the crank pedals need to be replaced. Q: Brakes don’t work/are not sensitive/leak oil A: Adjust the brakes first/check if the brake pads are worn, if there is oil on the brake pads or discs, insufficient friction/is the brake line loose/leak oil, then you need to replace the brakes directly Q: There is an abnormal sound from the brakes A: It may be the sound of wiping the disc. Ask the customer to check if the disc is deformed. If it is not deformed, adjusting it can solve the problem. The disc is stuck in the middle of the brake (with a gap), not too close to the left or right side of the brake Q: The riser is loose and has a gap A: Check if the headset is aligned and installed, and adjust the headset; if it doesn’t work, replace a headset Common problems and solutions for scooters Q: The meter cannot be turned on A: First check if the line on the back of the meter is plugged in tightly, and re-plug it; if the meter still cannot be turned on after the operation, send a replacement to the customer Instrument/Check if the instrument fuse is burnt out/Check if the instrument or switch plug pin is broken Q: Motor does not work A: If it is a dual motor, swap the front and rear controllers to see if the non-working motor will work normally; Q: Abnormal noise from the motor A: Check if there is an error code on the screen, and provide a video for the technician to determine if the abnormal noise is normal Q: Headlight flickers or does not work A: Check if the line is loose, and re-plug the interface; the step-down board of the light strip may be burned/check if the light switch is available, if not, replace the switch Q: Steering/taillight does not work A: Re-plug the line, if it does not work, re-issue the accessories Q: Brake failure A: Check if the instrument has an error prompt, if so, the brake power-off switch may be faulty, and the power-off switch needs to be replaced; or check if the brake pads are worn out and the brake line is loose Q: Error code appears on the instrument A: Check the corresponding manual to see what kind of fault the error code belongs to, and operate according to the instructions. If it still does not work, provide error code pictures/videos. Q: The charger does not work A: First check whether the charger is green or red-to-green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red-to-green light is normal, it may be a problem with the instrument.